Mini-Ensign Bollard is a sign-carrying bollard with a 150mm diameter face, ideal for cycle route marking.
Please Note:
1 x 485mm body sleeve is only available in red only or white only.
The Aircraft Grey Durapol model cannot be supplied with any of the Rebound Impactapol fixings.
Design Features
- Rigid socketed or Rebound and Rigid concrete-in models available.
- Wide range of sign face options.
- Recessed areas for retroreflective or decorative banding.
What is this? Banding options
- Choice of fixing options available.
What is this? Fixing options
Please note: The Aircraft Grey Durapol model cannot be supplied with any of the Rebound Impactapol fixings. - Optional blanking cap available.
Colours
Rigid Durapol Model: White, Black, Aircraft Grey.
Rebound Impactapol Model: White, Black.
Materials
Reboundable Bollard made from Impactapol material and compliant to Passive Safety Standard: BS EN 12767:2019
What is this? Durapol or Impactapol Materials
Rigid Bollard made from Durapol® material
Socket: Durapol Material.
What is this? Durapol Material
All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1:2007 Fixed Vertical Road Signs.
Dimensions
Height above ground: 1010mm (socketed), 1087mm (bolt-down).
Maximum diameter: 200mm.
Sign face diameter: 150mm.
Socket depth below ground: 500mm.
Extended base depth below ground: 420mm.
Bolt-down fixing depth: 75mm.
Adjustable depth concrete-in anchors maximum depth: 320mm.