Neopolitan 150 Bollard features a large 150mm top reflector for maximum visibility.
It is also available as a reduced height bollard (600mm), in Durapol® or Impactapol®, for use on bridges and schemes where improved visibility is required.
Please note: The Rigid Durapol - Bridgemaster Fixing is available on the Black models only.
1 x 485mm body sleeve is only available in red only or white only.
- Available in two heights.
- Rigid socketed or Rigid and Rebound concrete-in models available.
- Recessed areas for retroreflective or decorative banding.
- Wide range of fixing options available.
- Optional blanking cap available.
Rebound Impactapol Model:
Standard Colours: Black, White
Rigid Durapol Model:
Standard Colours: Black, White (Except when ordering Bridgemaster Fixing)
Non-Standard Colours: Stone, Dark Blue, Millstone, Sandstone
Please note that non-standard colour options are subject to minimum quantity orders of 10 or more. Please contact us for more information.
Bollard: Passively safe Impactapol Material or rigid Durapol Material.
Socket: Durapol Material.
All retroreflective materials supplied by Glasdon UK are as recommended in table NA1 of the National Annex of BS EN 12899-1:2007 Fixed Vertical Road Signs.
Height above ground: 925mm (socketed/extended base/guardsman models), 1005mm (bolt-down).
Maximum diameter: 200mm.
Socket depth below ground: 500mm.
Extended base depth below ground (Black/White Models Only): 420mm.
Guardsman fixing depth below ground (Black/White/Dark Blue/Millstone Models Only): 745mm.
Bridgemaster fixing depth below ground (Black Models Only): 311mm.
Bolt-down fixing depth: 75mm.
Adjustable depth concrete-in anchors maximum depth: 320mm.