Cadence™ Cycle Shelter

Designed to co-ordinate with contemporary architecture, the Cadence Cycle Shelter is a cost-effective external shelter for bike storage that is ideal for city centres, coastal locations and modern outdoor environments.

The thick 3mm Armortec coated steel frame and Rivnut roof panel fixing provide a strong and robust structure, offering vandal, corrosion and weather resistance. The Cadence Cycle Shelter has undergone a structural analysis to ensure safety when subject to strong winds and snow loading.

The curved design of the roof panels prevents rain and snow from accumulating on the shelter.

Cadence Shelter is available with or without a Glasdon Cycle Toast Rack, offering versatility to applications - without, the shelter can store motorbikes, mopeds and scooters. Or, if purchased with a toast rack, the shelter can store up to 10 bicycles.

The design of the shelter allows for side-by-side siting of multiple shelters, maximising space and storage capacity. If you would like to order more than one Cadence Shelter, please contact us for a quote.

Cadence Shelter is supplied with fixings and fully assembled for immediate installation. Fixing holes are also pre-drilled and fully Armortec coated, protecting the vulnerable areas of the framework from corrosion for minimal maintenance.

Please note: Delivery is not included. Carriage charges are based on the location of delivery. Please refer to the Map with Delivery Area Codes and select your delivery area (A to G) in the dropdown menu above. If you would like to purchase more than one Cadence Cycle Shelter, please contact us for delivery pricing and a quote.

Please note: The shelter must be installed on a sound concrete foundation (preferably to be in place prior to delivery to enable immediate installation upon delivery).

Minimum dimensions for the concrete foundation should follow either of the below recommendations:

• A single concrete base of dimensions 4,400 x 1,500 x 600mm deep
• Two concrete pockets situated below the shelter ends of dimensions 600 x 1,500 x 600mm deep.

Model specification drawings and instruction leaflets are available to illustrate these base requirements in detail.

This product is fully recyclable at the end of its life providing any stickers or graphics have been removed.